+ 34 943 897 111 highspeed@goialdehs.com

SPINDLES’

REPAIRS

We repair headboards of different brands and models.

We have extensive experience in repairs of heads of different brands and models. Therefore, we can offer you a series of packs that cover the most common repairs and services.

We explain how our repair service Works below. It is a complete service with three phases: before, during and after the repair.

REPAIRS

GOALDE HIGH SPEED’S REPAIRING SERVICE PACKS

We have prepared a series of packs with different services of the repair process which has three phases so you can choose the one that best suits what you need.

SERVICE
PACKS

01

PREVIOUS
SUPPORT
PACK

Choose this pack for incidents that need support before disassembling the machine’s spindle. Discover the verifications included in our protocol.

SERVICE
PACKS

02

DIAGNOSIS
PACK

Choose the diagnostic pack to identify the damage and what needs to be repaired directly

DIAGNOSIS

Through this service:

  • We identify the cause of the damage.
  • We indicate precisely the elements that need to be replaced or repaired.
  • We make a concrete and accurate assessment of the necessary repair.
  • This service is free, you just have to take care of the shipping and collecting the spindle.

More information about the diagnostic service.

SERVICE
PACKS

03

PACK
DIAGNOSIS
+ REPAIR

Choose this pack to know the reason for the breakdown and repair it.

DIAGNOSIS

Through this service:

  • We identify the cause of the damage.
  • We indicate precisely the elements that need to be replaced or repaired.
  • We make a concrete and accurate assessment of the necessary repair.
  • This service is free, you only have to take charge of the costs of the shipping and collecting the spindle.

More information about the diagnostic service.

REPAIR

Having previously made the diagnosis, we know the specific characteristics of the headboard and we can face a repair with full guarantee and according to our high quality levels.

More information about the repair service.

SERVICE
PACKS

04

PACK
DIAGNOSIS
+ REPAIR
+ SUPPORT
INSTALLATION IN MACHINE

Choose this complete pack to identify the damage, repair it and start the machine successfully.

DIAGNOSIS

Through this service:

  • We identify the cause of the damage.
  • We indicate precisely the elements that need to be replaced or repaired.
  • We make a concrete and accurate assessment of the necessary repair.
  • This service is free, you only have to take charge of the costs of the shipping and collecting the spindle.

More information about the diagnostic service.

REPAIR

Having previously made the diagnosis, we know the specific characteristics of the headboard and we can face a repair with full guarantee and according to our high quality levels.

More information about the repair service.

SUPPORT FOR MACHINE INSTALATION

In some cases, it is essential to add this service to the machine’s repairing and maintenance in order to guarantee the success of the launch.

For us, the repairing process only ends with a satisfactory installation on our client’s machine.

More information at the support service for machine installation.

SERVICE
PACKS

05

PACK
HOSTEL SERVICE

We recommend this service for machines’ manufacturers that have several spindles of the same type. With Hostel Service we take care of storing them properly and we make sure they are in the best conditions.
Enjoy this pack for only 150 euros per year.

More information about Hostel service

PUSH – EMERGENCY SERVICE

We attend immediately any problem with the spindles’ operation.

Discover our push service

Is it an emergency?

Activate the push service by pressing this button

REPAIRINGS

PREVIOUS PHASE

PREVIOUS PHASE

01

SUPPORT
PREVIOUS

Sometimes, starting the diagnosis on the machine itself is crucial to find the right solution. Therefore, this service takes place before dismantling the machine’s spindle.

Our wide experience with different models of spindles and machines allows us to provide a qualified vision centered on the headboard.

VERIFICATIONS IN THE PREVIOUS SUPPORT

In our previous support we start with an analysis with the following verifications included in our protocol:

  • Control of the mooring system and mooring force.
  • General checks of the lubrication system, cooling …
  • Control of jumps and axial displacements.
  • Control of encoder signals.
  • Vibration analysis.
  • General inspection of the machine.

PREVIOUS PHASE

02

RECEIPT
EID

When we receive the spindle in our facilities, we identify it, enter it into the system and assign it a project number for traceability.

PREVIOUS PHASE

03

INSPECTION
INITIAL

We thoroughly inspect the spindle to analyze the conditions in which we received it. By this way we analyze the possible damage before dismantling it.

CHECKS IN THE INITIAL INSPECTION

Upon receiving the electromandrino we perform the following checks:

  • Visual inspection.
  • General checks of the lubrication system, cooling …
  • Vibration analysis.
  • Control of the mooring system (force, height of the clamp, state of the clamp and cone …).
  • Jumps to 300 mm.
  • Jump in front and cone.
  • Control of axial displacement.
  • Control of encoder signals.
  • Existence of grounding.

PREVIOUS PHASE

04

DISASSEMBLY

We completely disassemble the headboard: we identify and separate each one of the components without damaging them.
Next, we digitally store the data related to the condition of the pieces.

PREVIOUS PHASE

05

CLEANING

We thoroughly clean critical parts and make sure they are in the best conditions for geometric inspection.

PREVIOUS PHASE

06

GEOMETRIC
INSPECTION

  • We perform a dimensional and geometric inspection of the critical components, paying special attention to coaxiality.
  • We guarantee the accuracy of the measurements since the temperature of our facilities is under control and in constant conditions.

PREVIOUS PHASE

07

REPORT
AND BUDGET

We analyze the data among all the departments and prepare a report with a personalized budget.

REPAIRINGS

REPAIR PHASE

REPAIR PHASE

01

PLANNING

Once the budget is accepted, we plan the repairing in the most efficient way to respond within the deadline and the particular needs of each client.

REPAIR PHASE

02

PROVISIONING
DESIGN AND MANUFACTURING.

Depending on the type of repairing, we take care of getting the components that have to be replaced or we design and manufacture them in our facilities.

REPAIR PHASE

03

MOUNTING

Once we finish the cleaning of the parts, we proceed to the assembly of the spindle. During the assembly process we are very meticulous in all areas: mechanical, electrical and electronic.

REPAIR PHASE

04

ELIMINATION
AXIS JUMP
/ BALANCED.

We balance the spindle to the highest level defined in ISO-10816.

REPAIR PHASE

05

VALIDATION AND PROOF OF OPERATION

The person responsible for this analysis is the technician who carried out the initial inspection and disassembly of the spindle. In this way, the same professional is responsible for the entire repairing process:

  • We validate the electromandrinos mechanically, electrically and electronically according to the parameters of appropriate use.
  • During the process we check the vibration values and the temperature of the bearing and the motor.
  • We carry out an exhaustive analysis of all the values that determine the correct operation of the spindle.

Once this stage is finished, the spindle is ready to be installed in the machine with a good operation guarantee.

Comprobaciones de la prueba de funcionamiento

  • Análisis de vibraciones.
  • Comprobación del sistema de lubricación.
  • Comprobación del sistema de refrigeración.
  • Control del sistema de amarre.
  • Fuerza de amarre.
  • Saltos a 300 mm.
  • Salto en frontal y cono.
  • Control del desplazamiento axial.
  • Control de señales encoder.

REPAIR PHASE

06

DESPACHO

Garantizamos transporte idóneo del cabezal porque utilizamos tanto embalajes adaptados a cada electromandrino como sistemas antichoque.

REPAIRS

FINAL PHASE

FINAL PHASE

01

POSTERIOR SUPPORT:
INSTALLATION IN MACHINE.

To achieve this start-up with guarantees of success, in certain cases this support is an essential complement to the rest of maintenance tasks of machine repair.
With this service we make sure that once the spindle is installed in the machine, the values and parameters validated in our test benches are maintained. These values and parameters determine the correct operation of the spindle in the machine.

Our wide experience with different models of electromandrinos and machines allows us to provide a qualified vision centered on the headboard.

FINAL PHASE

02

HOSTEL SERVICE

We recommend this service for manufacturers of machines that have several spindles of the same type.

Head storage service:

  • We keep the spindle in Goialde and at least once a year we review it with a and good performance test. This way we make sure that it is in the best conditions.
  • In this way, with a simple telephone call, you will have your electric spindle in a few hours in perfect conditions to replace the one that is broken or is in the machine’s maintenance process.

Enjoy this service for an additional cost of only 150 euros per year.

HOW TO STORE CORRECTLY AN SPINDLE

If this service does not consider it necessary, follow these tips to store an electromandrino properly:

  • Keep the shaft inside your package.
  • Store the spindle in a dry, clean and dust-free place.
  • The temperature of the place must oscillate between 10ºC and 35ºC. No sudden changes.
  • It supports the head on an antivibration surface.
  • At the storage location the vibration level must never exceed 0.1 mm. / sec
  • If it is permanent grease bearings: every two months it makes a 180º turn on the main shaft, thus ensuring that the grease spreads evenly and does not remain accumulated on one side of the bearing.

MULTIBRAND REPAIRINGS

SPINDLES

Franz Kessler

Weiss

Siemens

Fischer

Gamfior

Ibag

PeronSpeed

DMG

Mori Seiki

Faemat

GMN

TDM

Hsd

Omlat

MYL

Mikron

Step Tec

Cytec

Jobs

MULTIBRAND REPAIRINGS

MACHINES

Hermle

CME

DMG-Mori

Heller

Omlat

LAGUN

GORATU

MAZAK

Chiron

Ibarmia

NCorrea

SW

Doimak

Danobat

Deckel-Maho

HAAS

Makino

Jobs

Juaristi

Rambaudi 

EMAG

Etxetar

OKUMA

FIDIA

HARTFORD

Famar/Fausto Marinello

GEPRO

Zayer

Matsuura

Doosan

Forest-Liné